About the 193X643ABG224
The 193X643ABG224 is a Statotrol board made by General Electric or GE. This product is a type of printed circuit board or PCB. The 193X643ABG224 was developed to be a part of the 193x series.
The 193X643ABG224 is a large circuit board with a variety of electronic circuit board components. Two (2) inductors or coils are featured on the 193X643ABG224. These inductors are made up of coils of wire covered with some type of material. These inductors also have metal parts sitting on top. One (1) of the inductors are situated near the center of the bottom of the PCB. The other inductor is situated near the top right corner of the 193X64ABG224. This inductor features the label 594966. Along the bottom of the 193X64ABG224, a row of terminals are lined up. These terminals are enclosed in black terminal blocks. These terminals are labeled with initials. Near the center of the 193X643ABG224 on the left side, there is one large rectangle-shaped component that is connected to the 193X64ABG224 with a small metal plate. This component is connected to the PCB with a collection of eight (8) black colored wires. Two (2) black square-shaped components are positioned near the center of the 193X643ABG224. These square components are labeled in white print with the numbers 104X15 and 608012. A series of at least thirteen (13) large metal jumper pins is aligned on the top edge of the 193X643ABG224. Another series of jumper pins are placed below these large pins. There are seven (7) small pins in total.
