About the 193X643ADG114
The 193X643ADG114 is what is known as a Statotrol printed circuit board. The 193X643ADG114 was developed by General Electric or GE to be a part of the 193x series.
The 193X643ADG114 is a large rectangular circuit board. At the top of the PCB, there is a series of fifteen (15) large metal jumper pins. These pins may be connected to each other using a jumper. This would alter the functions of the board. Below this line of jumper pins is a series of seven (7) smaller jumper pins. Below these jumper pins on the left half of the top of the board, there is an empty area which features the words INSTALL 6VRK1000 REVERSING OPTION IN THIS SPACE and 3J AND 4J JUMPERS MUST BE REMOVED WHEN REVERSING OPTION IS INSTALLED. On the right side of the upper part of the PCB, there is a collection of six (6) small grey diodes. Many small resistors in different colors can be seen all throughout the 193X643ADG114. Some of these resistors are brown with bands that are grey, red, and silver. Others are white or grey with red, blue, grey, green, or yellow bands. The 193X643ADG114 has several orange capacitors which are round. There are around seven (7) of these capacitors are on the PCB in total. Situated on the bottom edge of the 193X643ADG114, there is one red MOV or metal oxide varistor. This MOV is circular in shape. A terminal block is positioned on each side of this MOV. Each of the terminal blocks feature several metal terminals.
