About the 193X643AGG112
The 193X643AGG112 is what is known as a controller card. The 193X643AGG112 was developed to be a part of the 193x series by GE. This series was created to control the operations of gas turbines systems. 193x products have been in a variety of industries around the globe for decades.
The 193X643AGG112 is a large square circuit board with a variety of electronic components. Paired up along the bottom edge of the 193X643AGG112, there are two (2) large terminal blocks. Each of these terminal blocks contain several silver metal terminals. The terminal block on the left contains a line of six (6) terminals while the terminal block on the right contains a series of seven (7) terminals. Between these two (2) terminal blocks are the initials ITB. Also positioned between the two (2) terminal blocks is one (1) red MOV or metal oxide varistor. A capacitor which is solid white in color has been placed above the left terminal block. Four square-shaped blue components which are labeled with the letter P are lined up vertically along the right edge of the 193X643AGG112. These components are labeled as 3P, 4P, 5P, and 6P. Near the center of the 193X643AGG112 on the board’s left half is a large black rectangular components with a series of plugs which are numbered. A collection of black and blue wires connect this component to the surface of the 193X643AGG112. A large inductor has been placed near the top right corner of the 193X643AGG112. This component may also be known as a coil. An inductor consists of a covered coil or wire. A metal piece is situated above the inductor which features the part number 44B338003 002.
