About the 193X643AGG113
The 193X643AGG113 is what is known as a Statotrol board. This is a type of printed circuit board or PCB. The 193X63AGG113 was created for the 193x series by General Electric or GE.
The 193X643AGG113 is a large printed circuit board. On the left side of the PCB, there are two long terminal blocks. The terminal block on the left side features a group of seven (7) metal terminals. The right side terminal block features a group of six (6) metal terminals. Below this terminal block is a large white capacitor. Situated below the left-side terminal block is a large inductor. This device can also be known as a coil. This device is a coil of wire which is covered. One (1) large fuse has been placed on the right half of the 193X643AGG113 board. This fuse is covered with a label in the middle. The fuse is bound on either side by silver metal pieces. Next to this fuse is another large white capacitor. Placed in the middle of the 193X643AGG113 on the right is a large black component which is attached to the PCB with black wires. On the left edge of the 193X643AGG113, there are four (4) blue devices which square-shaped. At the bottom of the 193X643AGG113 on the left side there is another large inductor or coil. This inductor is connected to the board with a long wire. Two (2) blue capacitors are situated on the left side of the 193X643AGG113 PCB near the middle. A green capacitor is positioned directly below these blue capacitors.
