About the 193X701ACG01
The 193X701ACG01 is what is known as a power supply circuit board. This is a type of PCB or printed circuit board. The 193X701ACG01 was produced for the 193x series by GE or General Electric.
The 193X701ACG01 is a large circuit board which has a large metal plate attached to one side. This plate has a large handle which can be used to take the board out and put it back into the system. On the right side of the 193X701ACG01, there are two (2) large components. One (1) of these components is a large inductor or coil. This inductor is a coil of wire which is covered by some sort of material. A large metal piece is situated over this inductor. Positioned above the inductor is a large black metal piece which is nearly cube-shaped. On the top of this metal piece is a large transistor. The transistor is silver and circular. It features the part numbers NTE104 and 9711. Four (4) large black capacitors are lined up along the left edge of the 193X701ACG01. One (1) more of these capacitors is situated near the top edge of the printed circuit board. One (1) brown resistor is sitting on the PCB on the lower half. Two (2) brown resistors which also contain colored bands can be seen on the half of the printed circuit board. These bands are orange, red, silver, brown, and purple. A series of several black wires is on the 193X701ACG01 which connects some of the components to the printed circuit board.
