About the 193X701CAG01
The 193X701CAG01 is a device which is known as a universal amplifier board. This is a type of PCB or printed circuit board. The 193X701CAG01 was made to be a part in the 193x series by General Electric or GE.
The 193X701CAG01 is a rectangular circuit board with a variety of components. Six (6) white potentiometers are placed along the lower edge of the 193X701CAG01. The potentiometers are shaped like rectangles. Each device has a small knob which may be used to change the resistance of the device. Also sitting along the lower edge of the circuit board is a large yellow capacitor. Many small transistors are situated all over the PCB. These transistors are solid black in color. A series of large resistors is placed on the 193X701CAG01. These resistors are brown. They are covered with a pattern of bands which are white, brown, red, and orange. Several of the resistors are lying horizontally on the 193x board and a few others are positioned vertically on the card. Two (2) small inductors can be seen on either end of the 193X701CAG01. One (1) of the inductors is situated in the top left corner and the other is positioned in the top right corner. Inductors are sometimes referred to as coils. These devices consist of coils of wire which are topped with metal covers. One (1) large metal component which is silver in color is placed on the right end of the 193X701CAG01. This large component is circular and it has been placed vertically on the surface of the PCB.
