193X701CCG01

About the 193X701CCG01

The 193X701CCG01 is what is known as a current limiting board. This is a type of printed circuit board or PCB. The 193X701CCG01 was made to be a component in the 193x series by General Electric (GE).

The 193X701CCG01 is divided into two separate areas. At the top of the circuit board, there is a large metal plate. This plate features a large metal handle and four (4) adjustable knobs. These knobs are labeled as RESPONSE, STABILITY, LIMIT/POSITIVE LIMIT, and LIMIT/NEGATIVE LIMIT. This portion of the 193X701CCG01 features three (3) resistors. These resistors contain bands which are yellow, red, pink, and orange. Two (2) of these are paired together and the third is located on the opposite end. There are two (2) diodes which are black with one silver end. On the opposite side of the 193X701CCG01, two (2) capacitors are paired together. These capacitors are silver and blue on the outside. They are positioned upright on the surface of the 193X701CCG01. Two (2) small resistors are situated next to the capacitors, one on each side. These resistors contain bands which are red, pink, blue, black, and yellow. One (1) more small resistor is also sitting near the blue capacitors. Above this resistor, there are two (2) diodes which are black with one silver end. On the other side of this section of the PCB, there are two (2) large resistors. These resistors are light blue and they have bands that are silver, orange, red, and grey. The 193X701CCG01 is divided into two parts by a slim printed circuit board.