About the 193X703ADG02
The 193X703ADG02 is a relay board manufactured by GE. The 193X703ADG02 was designed to fit into the Speed Variator Drive system or the SCR Drive System, both from GE. SCR Drives are DC closed loop adjustable speed drives. They are unidirectional and have adjustable acceleration. Speed Variator drives are also closed loop adjustable speed drives. However, Speed Variator drives are bidirectional. Both the Speed Variator and the SCR drive system can be used for machine tool control or for coordinated lines.
The 193X703ADG02 is designed with a wide front panel with a handle. The front panel has four round openings. On this board, two of these openings are populated with plastic spacer plugs. The other two openings hold indicator lights. These are labeled RA (IL226) and RB (IL227.) The amber indicator light glows when voltage is applied to the corresponding relay. The front panel connects to the circuit board via two connector screws and is reinforced by a metal bar attached to the top side of the PCB.
The 193X703ADG02 is a two relay board. Both relays have a relay diagram printed on the top side of the component. The board has two polyester vinyl capacitors and two sets of two carbon composite resistors (four in all.) The board has black markings on the board to indicate the locations where more components may be added, up to two relays, two capacitors, and four resistors.
The 193X703ADG02 will be protected by a static-reducing material during shipment to your facility. Please review safety data before unboxing your new part. Manufacturer publications like manuals or data sheets are good resources for this information.
