193X726AJG01

About the 193X726AJG01

The 193X726AJG01 printed circuit board, which is a double-layered board, is a Driver Coordination Board from General Electric designed as part of the company’s DC drive systems.  This includes series like the Speed Variator drive or the SCR drive system.   These are closed-loop, adjustable speed general-purpose systems typically used for machine tool control.   The 193X726AJG01 is no longer available directly from General Electric, but it can usually be sourced from us here at AX Control as either a refurbished part or new surplus. 

The 193X726AJG01 is designed with an attached two-color front faceplate that includes the board’s ID number, its use, and the GE logo.   This faceplate also has a handle attached to its bottom edge to facilitate easier removal or replacement of the board. 

This front panel is designed with four round openings.  Two are unmarked and empty.  One is marked voltage limit and is also empty.  The last is marked current limit and includes a rotary dial.  This dial is connected to a potentiometer located on the lower circuit board.  

The upper circuit board of the 193X726AJG01 is attached via screws and standoffs to the lower.  The lower holds the majority of components, including the above-mentioned potentiometer.  Additional components include resistors, capacitors, and transistors.  Components on this board are typically numbered but are not marked with a reference designator. 

Our warehouse team carefully packs every order leaving our facility, including using anti-static wrapping to ensure no damage occurs from static buildup during transit.