About the 193X801BAG01
The 193X801BAG01 is a printed circuit board component created by GE for drive systems like the Speed Variator and the SCR Drive. These DC drive systems are both adjustable speed, closed-loop systems that run with DC motor control. They include power and control units and may be used for machine tool control.
The 193X801BAG01 functions as a Coordination-Signal Amplifier-Linear Time Card. The PCB is designed with an attached front panel. The front panel attaches to the front edge of the board using two screws. The front panel is marked with the board use, the board number, and the General Electric round logo. It includes four round openings, three of which have been closed up by plugs. The fourth is populated by a rotary dial attached to a rotary potentiometer located on the PCB. This dial is labeled P-440 Time Adjust. The front panel has a rounded bar handle that facilitates easier removal and insertion of the board into racks for replacement and repair.
The 193X801BAG01 is populated with a single large transformer attached to a frame. It has ten diodes, four transistors, and six capacitors, including capacitors made of electrolytic material, and capacitors made of polyester vinyl. Resistors tend to be made of carbon composite material. Resistors, diodes, and capacitors may be mounted horizontally or vertically. Some components are numbered, but no components carry component identifying designators.
Our warehouse team will properly and carefully pack the 193X801BAG01 for shipment to your facility. This includes the use of an anti-static sleeve to protect from electrostatic discharge.
