About the 531X102CCHAEM1
The 531X102CCHAEM1 is a board component for GE drives and industrial systems for industrial applications. GE has produced a wide variety of drive and drive components over several decades.
The 531X102CCHAEM1 has standoffs to allow for the addition of two auxiliary boards. These stand offs are connected to the board near two vertical pin connectors, which facilitate communication between these auxiliary boards, when installed, and the motherboard. The motherboard has an additional four vertical pin connectors and two vertical pin headers. The board has over fifteen jumper switches and several transistors. Transistors are placed around the surface of the board.
The 531X102CCHAEM1 has a total of eight potentiometers located on the board. Six of these are placed on the board in a vertical position. The last two potentiometers are placed side-by-side, standing, near one corner of the board. The board has a large number of capacitors typically made of polyester vinyl, although a few capacitors are made of electrolytic material. It is populated by resistors and by over 35 resistor network arrays. The board also has multiple inductors. Integrated circuits located on the board include oscillating chips, octal bus transceivers, and quad 2-input OR gates. The board has six LED indicators. Each of these LEDs is red and is individually labeled.
The 531X102CCHAEM1 is factory drilled in each corner for mounting options. The board is marked with codes like VA-4, VDC, FR00/0, and F31X102CCHCBG1. More information on this board, handling instructions, and installation procedures may be found in user guides and data sheets that reference the part number.
