531X111PSHAKG3

About the 531X111PSHAKG3

The GE Terminal Board Relay Card 531X111PSHAKG3 supplies the 5 V dc, 15 V dc, and 24 V dc current used by the drive. It also features the pulse transformer for the motor field circuitry. You must consider that the GE Terminal Board Relay Card 531X111PSHAKG3 might be a later version of the board it is replacing in your drive. The replacement board might have components that appear to be different and it might have connectors, jumpers, terminals, and switches in different locations on the board. However, despite the differences, the boards are compatible and will provide the same functionality in the drive.

Before you disconnect any cables or wires, compare the boards and note any differences. It is best practice to use labels or stickers to write down where each cable or wire is connected on the original board. Inspect the replacement board and locate a direct match for the connector number. If a direct match is not available, refer to the information that came with the board for instructions.

Also inspect the original board for jumpers and compare the jumpers to the replacement board. Move any jumpers to the positions that match the original board. If you cannot locate a direct match from the original board and the new board, the manuals supplied with the replacement board will provide information. The replacement board has been tested for compatibility and a work around is available for any circumstance you have encountered.