531X124MSDAGG2

About the 531X124MSDAGG2

The 531X124MSDAGG2 is a suppressor circuit board produced by General Electric. The 531X124MSDAGG2 is a small circuit board without a whole lot to it. The 531X124MSDAGG2 has three large dark red circular polyester capacitors and two large yellow polypropylene capacitors. These capacitors are used to generate an electrical field which is then used to store additional energy for the circuit board to use. The 531X124MSDAGG2 has four metal prongs scattered around the circuit board. The 531X124MSDAGG2 has four large light blue resistors with strips. The resistors strips are used along with a colored code to determine the amount of energy that each resistor can restrict. Each colored strip corresponds with a number that can be used in an equation to determine the resistance. The 531X124MSDAGG2 has two large silver resistors and one long slender silver resistors. The two large silver resistors are secured to the circuit board with zip ties. There are eight holes in the circuit board. Four holes have a metal border and the rest do not have a border. Each component is outlined with a thin white line. Every component is labeled with a combination of letters and numbers for easy identification. The part number (531X124MSDAGG2), the manufacturer (General Electric), and the type of circuit board (VA-5 MFC SUPPRESSION) is printed on the front. 

Please call AX Control with any further questions.

**General Electric has provided the initial technical support. The staff at AX Control recommends referring to the original manufacturer's manual for safety procedures and instruction on how to install the part.