531X129SNCG1

Product Description

The 531X129SNCG1 is a snubber card by General Electric. The 531X129SNCG1 has eight small black diodes with a silver line near the cathode. The 531X129SNCG1 has five long black resistors and four huge thick silver resistors. These nine resistors all have the amount of energy they can restrict printed on the side of them. The large silver resistors are so large they are zip tied to the circuit board. The 531X129SNCG1 has a long length of black wire on the circuit board behind the huge silver resistors, and a small length of black wire on the circuit board in front of the huge silver resistors. In the center of the circuit board is four pre-drilled holes with metal brackets over them. Each section of the circuit board has an outline in green around the attached components. Every component is labeled in green with a combination of letters and numbers. The circuit board part number (531X129SNCG1) is printed on the face of the circuit board along with where it was made (U. S. A.) and has General Electric’s stamp. The circuit board also has what type of board (SNUBBER CARD //75-125HP) it is printed on the face.

If you would like more information about the 531X124MSDAHG2 or any another product offered by AX Control, please call the skilled staff today.

**General Electric has provided the initial technical support. The staff at AX Control recommends referring to the original manufacturer's manual for safety procedures and instruction on how to install the part.