About the 531X135PRGAMM1
The 531X135PRGAMM1 is an Electronic Programmer Card. The 531X135PRGAMM1 is also referred to as a human-machine interface or HMI. The 531X135PRGAMM1 has a keypad with sixteen buttons on it. The buttons are labeled zero through nine along with a few others. Each button has multiple functions. The button labeled one is labeled “RUN” and “DGS”, button number two is labeled “SLOW” and “DGR”, button three is labeled “JOG” and “DVM”, button number four is labeled “R1” and “ARM V”, button five is labeled “R2” and “ARM 1”, button six is labeled “REV” and “FIELD 1”, button seven is labeled “A/M” and “SPEED”, button number eight is labeled “RATIO” and “TORQ”, button number nine is labeled “PRGSV” and “HP”, button number zero is labeled “DRV #”. The other buttons are labeled as follows. “REFR / ENTER/ RAM”, “SET /NEXT/ TEST”, “RESET / CLEAR / MODE”, “INC (with an arrow pointing up)”, “DEC (arrow pointing down)”, and one is red and labeled “STOP”. All the labels in the first set are labeled red and the labels in the second set are labeled in blue. The 531X135PRGAMM1 has an LED screen at the top of the device. Directly under the LED screen is a slit that is as long as the LED screen. The 531X135PRGAMM1 secures into place with four metal screws and has two sets of indentations along the edges (two half circles and the others are two right angles).
Please call AX Control’s skilled staff for a quote or any further information.
