About the 531X135PRGBBG1
The 531X135PRGBBG1 is a General Electric printed circuit board that is used as part of their various DC drives, including the DC-300 drive. While many of these drives are currently not supported by the OEM, we typically keep the drives and their replacement parts in stock here at AX Control. Stock availability shows on each part page, but for the most up-to-date information, feel free to reach out to our staff.
The 531X135PRGBBG1 functions as a programmer card. This card is marked with two identification numbers: this 531x number and a secondary F31x id number. The board includes additional codes like VA-4, Froo/o, and 003/0.
The 531X135PRGBBG1 is designed to affix underneath a keypad display with sixteen keys and a ten-digit display. The faceplate of this top display includes four screws that connect firmly into four screw mounts located on the 531X135PRGBBG1 board. The unit also has edge clips that hold it in place. The associated display includes a number keypad (zero through nine) with a stop button, a clear/mode button, and an enter button. The clear/mode button also functions as a reset key.
Board components include resistor network arrays, jumper switches, a right-angled cable connector, and various resistors and capacitors.
Please review original manuals, user guides, and data sheets from General Electric for important information regarding the installation, maintenance, and handling of this board. AX Control treats circuit boards like the 531X135PRGBBG1 as static sensitive and will ship the unit accordingly to prevent damage from static buildup.
