531X138RDGAAG1

About the 531X138RDGAAG1

531X138RDGAAG1--Rack Driver Plug Card

The 531X138RDGAAG1 is a Rack Driver Plug Card circuit board component fabricated by GE.  This PCB fits into various GE general purpose drive systems like the AC300 or DC300. While typically considered obsolete, the original, flexible design of these drives made them capable of use in industrial settings for many tasks.

The 531X138RDGAAG1 has only a few components on the large, rectangular board.  The board allows multiple interconnections to be made in a rack system through one circuit board.  It is marked with several codes, including its primary (531x) and secondary (F31x) board numbers, along with VA-4, 002/0, and FR00/0.   The top half of the board is populated by six header connectors. There are three 24-pin connectors stacked one below the other on the left board side.  On the right side, the three connectors also stack from top to bottom. These connectors include a 9-pin, a 14-pin, and a 16-pin connector. Additionally, there are two lines of vertical pin connectors across the bottom edge.  The pins on these connectors are longer and more robust. Each pin is individually labeled and numbered, with labels for the first row located below the connectors and labels for the second row located above them.

No other type of component is located on the surface of the  531X138RDGAAG1. There is no configurable hardware, no integrated circuits, or any kind of component for the handling, division, or resistance of electrical charges. Please refer to data sheets, user guides, or manuals that reference this board for more detailed information like installation guidelines or handling procedures.