DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
DS200AAHA1 | GE Turbine Control | Mark V |
❮
❯
AVAILABILITY:
CALL FOR AVAILABILITY
The 531X139APMAXG2 is a GE board component manufactured for general purpose drive systems like the DC-300. These drives, which are most often used for industrial applications, are powerful, flexible systems capable of many uses.
The 531X139APMAXG2 is a rectangular board marked with codes 002/2, 94V-0, FR01/0, 004/0 and 005/0. The board’s alternate board number is F31X139APMALG2. It is drilled in all corners and has four additional drill holes located along its edges.
The 531X139APMAXG2 is populated with multiple integrated circuits, five relays, four potentiometers, over twenty-five resistor network arrays, and a jumper switch. The board has two terminal strips. These are placed facing each other and have six screw connections per component. Other connectors on the board include two vertical pin cable connectors, both male, and four vertical pin header connectors. Locations for many other components are marked on the board but are not filled with components; these components may be used in other board versions.
Installation parameters for the 531X139APMAXG2 are provided by the original manufacturer through data sheets or the device manual. Following these instructions will significantly reduce the risk of accidents or possible damage to components. Only properly trained personnel should install or handle this or other 531X boards. Technical support for this series was originally provided by General Electric.
Please contact our sales team at AX Control with any questions you have about this or any other product on our site. A team member is ready to provide a quote and turnaround time, as well as answer your questions about repair, warranty, shipping, or our exchange program.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 1-2 weeks | $339 |
Our highly skilled technicians can repair your 531X139APMAXG2. All of our repairs come with a 3 Year AX Control Warranty. Please contact us for additional information about our repair process. To receive the repair pricing and lead time listed above please process your repair order via our website. The following repair options may be available upon request:
All PLCs, HMIs, and Turbine Control Boards: | 3 Years |
All AC/DC and Servo Drives: | 2 Years |
All Motors: | 1 Year |
AX Control Inc. sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed.
AX Control Inc. is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing
herein are the property of their respective owners.
Copyright 2025 - AX Control Inc. - All Rights Reserved