Product Description
The 531X170TBSADS1 is a long and narrow PCB component manufactured by General Electric for use within GE general purpose drive systems like the DC-300 drive. Please refer to your own user guide or manual to determine if this PCB is compatible with your system. Our team will also be happy to help you determine compatibility.
The 531X170TBSADS1 is a TB Option Card. There are many versions of this card within the 531x series. The 531X170TBSADS1 has dimensions of 11 inches by 2.75 inches. The board has drill holes in each corner to allow for mounting. The board has several other drill holes for stabilization. It is marked with codes like F31X170TBSADG1, 002/0, 005/0, 004/0, FR00/0, and VA-5.
The 531X170TBSADS1 is populated with a silicon bridge rectifier, a jumper switch, an inductor coil, a single stab-on connector, and a relay. The relay is a 2 Form C relay that is marked DS2E-M-DC24V. It is suitable for use in difficult environments due to its epoxy resin seals. It also has three header connectors (a nine-pin connector, a sixteen-pin connector, and a twenty-four pin connector,) and a vertical pin connector (male) as well as a DC-37 female connector.
The last components on the board are two switch components and two terminal strips. The switch components each have four toggles each that can be set to DCE or to DTE. The terminal strips have a total of 75 screw connections, fifty-four on one and twenty-one on another. Each screw connection is numbered and labeled.
