About the 531X170TBSAEG1
The 531X170TBSAEG1 is a PCB component produced by General Electric for use with and by GE general purpose drive systems like the DC-300 drive. Please refer to your user guide or manual to help you determine compatibility with the 531x series. Our team can also help you check for compatibility.
The 531X170TBSAEG1 is a TB Option Board. The 531x series has multiple versions of this board. The TB Option Board is a long, narrow board with dimensions of 2.75 inches by 11 inches. It has mounting holes located in each corner, as well as additional factory-made holes located elsewhere on the board surface. The 531X170TBSAEG1 is marked with codes like FR00/0, F31X170TBSADG1, 3589, and 004/0.
The 531X170TBSAEG1 has components like a 2 Form C relay marked DS2E-M-DC24V. This relay has gold-clad contacts that provide stable contact resistance over time. The board has a stab-on connector, three header connectors, and two vertical-pin connectors (one male and one female.) It has a polyester vinyl capacitor, an inductor coil, two switch components, a single jumper switch, and a silicon bridge rectifier diode. Each of the switch components has four toggles located on its surface. These toggles can be set either to DCE or to DTE.
The final components on the 531X170TBSAEG1 surface are two terminal strips. One of these has 54 screw connections, while the other has 21 screw connections. Each connection is individually numbered and labeled. More information on the board’s use, its installation, handling, and function, may be found through publications from the manufacturer such as user guides and manuals.
