About the 531X182IFGAEG1
The 531X182IFGAEG1 is a VA-4 Inverter Firing Generator card. This product is from General Electric. The 531X182IFGAEG1 has three red light emitting diodes (LEDs of short) at the base of the circuit board. The 531X182IFGAEG1 has various other diodes around the circuit board to direct energy flow. These diodes can be compared to a one-way street. They only allow energy to go in one direction. The 531X182IFGAEG1 uses resistors to eliminate energy that the circuit board does not use. The resistors have various colored marks that are there to allow the engineer to calculate the amount of energy each resistor can disperse. If the 531X182IFGAEG1 needs to store or save energy it uses its capacitors. These devices create an electrical field as the energy current passes through it. This electrical field then takes and stores the energy and does not let any escape. The 531X182IFGAEG1 has seven small transistors that are identifiable by the three contact points. These tiny components help amplify or can change the power or signals of the circuit board. All of these components and the circuit board as a whole are controlled by the eighteen Integrated Circuits. These are the brains of the circuit board and have all the data and programs to keep everything running smoothly. At the bottom of the circuit board is a small box with the following written inside. It reads JP1, JP2, JP3, JP4, JP5, JP6. Underneath this, it reads PINS 1-2 FOR 500 KVA and PINS 2-3 FOR 200 KVA.
For more details please call or email AX Control.
