531X182IFGAHG1

About the 531X182IFGAHG1

The 531X182IFGAHG1 is a VA-5 Inverter Firing Generator constructed by General Electric. The 531X182IFGAHG1 can also get rid of energy if need be, by converting the energy into heat using its many resistors. The 531X182IFGAHG1 uses twenty chips to store data codes to tell the circuit board what to do and when to do it. Chips are also referred to as Integrated Circuits (abbreviated IC) or Microchips in various manuals. The 531X182IFGAHG1 uses devices to control energy flow across the circuit board. These devices are called Jumper Ports. They are small metal sticks placed around the circuit board where the energy current could flow. To allow or not allow the energy to move in that direction the Jumper Ports have covers to act as a switch. The 531X182IFGAHG1 uses various diodes to direct energy flow. Each diode has a line near one of its ends. This small line is there to indicate which way the energy is moving (it flows near the line). The 531X182IFGAHG1 has seven masculine attachment points. These connection points are used with various wiring harnesses to allow interaction between the 531X182IFGAHG1 and adjacent circuit boards. To lock the 531X182IFGAHG1 into place there are eight puncture holes around the perimeter of the circuit board. The 531X182IFGAHG1 uses capacitors (also called condensers in manuals in other languages) of multiple shapes and sizes to house energy in their electrical fields for the circuit board to access later. The 531X182IFGAHG1 has a few transistors to intensify signals around the circuit board.

You can email or call AX Control for more details.