About the 531X1860CPSAHG1
The 531X1860CPSAHG1 is a PCB board manufactured by GE. This PCB is not designed for any specific system; rather, it is designed for use within several general purpose drive systems from the GE company. Please refer to your system’s manufacturer specifications to determine compatibility.
The 531X1860CPSAHG1 functions as a Commutation Power Supply Card. This is also known as a switched-mode power supply. Its main advantage is a greater efficiency due to less dissipation of power as compared to linear regulators. The board is marked “GE FANUC VA-3.” The board is factory drilled in each corner and at five additional points. It also has two tables printed on its surface. One is an AC Volts/Voltage FDBK Jumpers table, while the other is a KVA Rating/ JP5 Pin Setting table.
The 531X1860CPSAHG1 is populated by six transformers. Each of these components is paired with a carbon composite resistor, a metal film resistor, a two-position header connector, and a diode. The board has five additional two-pin header connectors and three vertical pin cable connectors. It has several lines of resistors located elsewhere on the board. Other components include a single MOV (metal oxide varistor,) one integrated circuit, thirteen stab-on connectors, six wire-wound resistors, six axial electrolytic capacitors, and one surface mounted electrolytic capacitor. Stab-on connectors on the top edge of the board are labeled ASAA, ASAM, ASAK, ASBA, ASEM, ASBK, ASCA, ASCM, and ASCK. Stab-on connectors on the side of the board are labeled P2C, N2, P1, and N1. More information about this board and its components may be found through manufacturer publications like manuals or data sheets.
