531X191RTBALG4

About the 531X191RTBALG4

General Electric developed their 531X191RTBALG4 card as a relay terminal board. Specifically, this device was placed into the 531X replacement drive board series. Installing this card provides two features to the host drive. It offers seven relay points that can command and execute externally wired circuits. It also allows the the user to access the integrated coils and contacts using the terminal board.

531X191RTBALG4 provides the host drive with seven additional relay points. These relays can be used to execute functions on external circuitries wired to the board. Both RTB points and relay contacts can be tabulated with this card. A G4 version of the board, relays in the card feature a 24 VDC rated coil, or 37 mA. Contacts within the relays have a rated current of 2.4A and rated voltages at either 125 VAC or 28 VDC.

Review the installation parameters before beginning to install the 531X191RTBALG4 relay terminal board. Following these provided instructions helps to reduce the risk of damages to the board or drive. To ensure proper installation, only allow qualified personnel to handle this card. All installation and wiring instructions are available in the corresponding device manual and datasheet. General Electric, the board’s manufacturer, originally provided technical support for this card.

The trusted sales staff at AX Control is ready to help with all of your automation needs. To receive pricing and other information for the 531X191RTBALG4 relay terminal, along with any other part or repair, please contact our office by phone or email.