531X207LCSAMG1

About the 531X207LCSAMG1

The 531X207LCSAMG1 board was developed as a local area network (LAN) current source board. The manufacturer, General Electric, designed this card for the 531X replacement series of drive boards. As it is a standard component of the drive cabinet, this card can be installed into a number of machines across GE’s brand of drives and exciters. This current source board provides rated power supplies of 5 VDC as well as 15 VDC to the LAN board when installed. A fuse protected 115 VAC input power source provides necessary electricity to the board.

Power supplies required by the LAN communication board is provided by this card. A jumper (J1) found on the board allows users to select between the two provided power supplies. Should these levels be adjusted, users must then adjust the output accordingly. A potentiometer found on the card allows for the output configuration. 531X207LCSAMG1 also features a protected fuse as well as a 12-point terminal board. The terminal board relays all signals sent to and from the card.

Necessary installation parameters should be reviewed before board installation occurs. Meeting the provided parameters will help to reduce any risk of damage to the board, drive, or user. Included on the 531X207LCSAMG1 board are electrical circuits, so only allow trained users to install this card. The series manual as well as the device datasheet contains a comprehensive installation and wiring guide. Technical support for the entire 531X series was originally provided by General Electric.

Our trusted team at AX Control is happy to speak with you via phone or email about all of your automation needs. Information and pricing for the 531X207LCSAMG1 board, as well as any other part or repair, can be obtained by speaking with a member of our knowledgeable sales staff.