About the 531X300CCHAFG1
General Electric is the manufacturer of the VA-4 control card with the part number 531X300CCHAFG1. The 531X300CCHAFG1 can control many things with all the components on it. The 531X300CCHAFG1 can control how much energy the circuit board stores by using the many variously sized and shaped capacitors. The 531X300CCHAFG1 rids itself of energy just as easily by sending it to the hundred-plus resistors. The circuit board uses over thirty-five didoes to control the direction of the energy flow. Diodes allow energy to flow in a single direction through them. The circuit board can manipulate the energy’s signals by using the transistor scattered around the surface. To control all of this the circuit board relays on the integrated circuits. The 531X300CCHAFG1 has twenty-eight of them. The integrated circuits hold all the programming that controls the circuit boards day to day operations. Integrated Circuits are also referred to as ICs (short for Integrated Circuit), chips or microchips depending on the manual you have.
The circuit board uses six red lights (LEDs or light-emitting diodes) to indicate what is going on with the circuit board. To manually adjust and control the amount of energy going through certain areas the engineer can use the eight potentiometers (variable resistors). To manually adjust the direction of the energy, flow the engineer can use the many sets of jumper ports to turn the path for the energy to flow on and off, much like a light switch.
Call or email AX Control for more details.
