About the 531X300CCHAJM2
The 531X300CCHAJM2 is a PCB board manufactured and released by GE. The board is designed as part of multiple systems, including the DC-300 system and other similar general purpose drives. These typically are used for industrial purposes. Your system’s user guide or manual will help determine if the 531x series of boards are compatible.
The 531X300CCHAJM2 is a Control Board. The board has an alternate board number of F31x300CCHAFG1. The board is etched with codes like VA-4, 002/0, ct88-10, and FR00/0.
The 531X300CCHAJM2 has six light emitting diodes (LEDs) that are each numbered in sequence. This number sequence starts with one and doubles as it moves to the next LED (one, two, four, etc.) The board has multiple resistors (usually metal film,) capacitors (made typically from ceramic or polyester vinyl, but some from electrolytic material,) and diodes. The board has eight potentiometers and over twenty resistor network arrays.
The 531X300CCHAJM2 connects with other components through its six male cable connectors. These are vertical pin connectors with a various number of pins. The board also has two header connectors, one with nine pins and one with twenty-four, as well as roughly a dozen terminal pins. The board is fitted with eight standoffs that allow for the installation of two auxiliary boards using screw connections.
The 531X300CCHAJM2 is populated with a push-button switch. The board has surface wiring in several places. Factory-made drill holes are located in each corner. The board has jumper switches, inductors, and multiple integrated circuits. More information can be found through data sheets, manuals, and user guides that reference this board number.
