About the 531X300CCHANM3
The 531X300CCHANM3 is a PCB manufactured by GE for the DC-300 drive or other similar general purpose drive systems. These systems are typically used in industrial settings for a variety of uses.
The 531X300CCHANM3 functions as a Control Card within these various systems. The board is etched with code VA-4, FR00/0, and CT 88-42. The board also has an alternate board number of F31X300CCHAFG1 printed in the top right-hand corner.
The 531X300CCHANM3 has eight potentiometers. These components are individually labeled with the values they control (for example, VFBB and Offset.) The board has six red LED or light emitting diodes located in the upper left corner. These are numbered 32, 16, 8, 4, 2, and 1. The board has drill holes within the body of the board designed for standoffs to connect two auxiliary boards. These boards connect with screw connections installed into these standoffs.
The 531X300CCHANM3 is designed with six vertical pin cable connectors (male) of various size. The board has a 9-pin header connector and a 24-pin header connector. The board also has several individual terminal pins that are also individually labeled. For example, in the bottom right corner, there are several of these pins labeled -15V, +15V, -24V or +5V.
Other components on the 531X300CCHANM3 include one push-button switch, several places where surface wiring is used, 30-plus jumper switches, transistors, stab-on connectors, over twenty resistor network arrays, and inductors. The board is populated by various integrated circuits. It uses metal film resistors and capacitors of various materials. Please refer to the appropriate user guides or manuals if more information is needed.
