About the 531X303MCPBDG1
The 531X303MCPBDG1 functions as an AC Power Supply Card. It has been fabricated by General Electric to function within any of several older, and now often obsolete, drive systems for general purpose use created by GE. The DC-300 drive is included among these. While these drives are older, they are flexible and complex systems that can be used for industrial applications.
The 531X303MCPBDG1 carries alignment marks (letters and numbers) on the left and bottom edges of the board. It is also etched with the board use title, its id number, alternate board id number, and several identifying codes. Board components tend to be marked with their original manufacturer identification number and then marked again with a reference designator on the board surface.
The 531X303MCPBDG1 has multiple connectors for communicating with other boards and off-board components. This includes a small three-screw terminal strip, vertical pin cable connectors, and several header connectors. The board also uses stab-on connectors. These are usually located along the edges of the board.
The 531X303MCPBDG1 has five large fuses and three small fuses. This includes a five amp fuse and a two amp fuse. The board has jumper switches, two green LED indicators, three transformers, six heat sinks, twenty transistors, a relay, over twenty resistor network arrays, and a metal oxide varistor. The board has integrated circuits, diodes, resistors, and capacitors.
If the user would like more information on board components or would like written instructions for installation or proper handling, it is best to refer to original publications from GE that reference this board number. This includes series user guides, data sheets, and manuals.
