About the 531X305NTBACG1
General Electric developed the 531X305NTBACG1 card as an NTB/3TB terminal board. This card was developed for the 531X series of replacement drive boards. A number of integral board features are provided by this board. Some of the interfaces included on the board include power supplies, encoders, analog I/O, relay outputs, and serial outputs.
The NTB/3TB terminal card provides the drive with a number of important board features. 531X305NTBACG1 can produce regulated output supplies of 5 VDC and 15 VDC. It is also capable of producing unregulated 24 VDC and 120 VAC supplies. Onboard jumpers allow users to ability to configure the interface for 5 and 15 V encoders. Seven relay outputs are also integrated into the board, with each featuring a contact rating of 120 VAC, 1 A. The relays are a combination of form C and form A outputs. Low level analog I/O can be scaled using the four potentiometers found on the card.
Protecting the integrity of the card relies on users following the installation parameters outlined by the manufacturer. These prescribed guidelines help to decrease the risk of damages to the overall drive system. As this board provides a wide range of features to the drive, only trust qualified personnel to handle and install the 531X305NTBACG1 card. Reference the device’s manual and datasheet for a complete installation and wiring guide. General Electric originally provided technical support for this terminal board.
AX Control’s seasoned sales team is always available to assist with any automation needs. Please call or email our office to receive pricing information for the 531X305NTBACG1 terminal board or for any other part or repair.
