531X307LTBAKG1

About the 531X307LTBAKG1

The General Electric 531X307LTBAKG1 LAN (local area network) terminal board was developed for the 531X series. Members of this series are replacement boards, allowing for installation in a number of GE brand drives and exciters. The card operates as an interface system for the controlling drive and a number of externally connected devices. Possible external devices include contactors, interlocks, and indicator lights.

An interface system for LAN signals to and from the drive is available when this card is installed. 531X307LTBAKG1 provides the drive with eight configurable control input plugs. Integrated card inputs can accept both AC and DC voltages rated between 2 and 240 V. These voltages are then converted into 24VDC logic signals and subsequently sent to the control board. The card’s input plugs can send signals throughout the LAN terminal, the drive control board, and the NTB terminal. Onboard, the card features seven outputs. All outputs found on the card contain low voltage and low current form C relay contact connectors.

Included with the board are a series of installation parameters that should be met. By following these guidelines, a number of accidental damages can be avoided. Only allow qualified personnel who are trained in installing drive boards to handle this card. For step by step instructions on wiring and installing 531X307LTBAKG1, please refer to the device’s datasheet and manual. General Electric, the manufacturer of the board, was the original provider of technical support.

Please contact one of AX Control’s sales team members by phone or email for all of your automation needs. Pricing on the 531X307LTBAKG1 board, as well as other parts and repairs, can be obtained by contacting our office.