531X309SPCAGG1

About the 531X309SPCAGG1

General Electric developed the 531X309SPCAGG1 as a signal processor card. It belongs to the 531X series of replacement boards. As with most members of this series, the board can install into any number of GE manufactured drives and exciters. When operating, the board works to process any I/O received by both the LAN control board and the drive control board.

531X309SPCAGG1 includes a number of helpful features that improve overall drive function. Encoders and tachometers are provided with an interface medium with the board. Received supply speed feedbacks from these external mechanisms are then sent to the control board for speed regulation. The card converts the three current reference signals and the voltage level signal into voltage reference signals. These newly converted signals are then sent to the drive’s control board. Inputted RS-422 serial signals are processed with this board and then are sent to the system’s motor control processor. Users can configure the board for hardware configuration, signal filters, and other options using the onboard switches, jumpers, and potentiometers.

Installation parameters outlined by the board’s manufacturer should be followed. The integrity of the drive will be preserved by following all provided guidelines. Do not allow any untrained personnel to handle or install the board. For a complete guide to wiring the 531X309SPCAGG1 board, please refer to the processor card’s manual and datasheet. Technical support was originally provided by General Electric, the manufacturer.

Please contact our friendly and knowledgeable sales team at AX Control for all of your automation needs. Prices for the 531X309SPCAGG1 signal processor card, as well as all other parts and repairs, can be obtained by calling or emailing a member of our staff.