About the F31X118CCAACG1
F31X118CCAACG1--GE AMP CARD
The F31X118CCAACG1 is a small board component fabricated by the General Electric company. This PCB has an alternate board number of 531X118CCAACG1. It is designed for use within general purpose drive systems. Among these is the DC-300 drive.
The F31X118CCAACG1 has factory made drill holes located in each corner of the board. Connectors on the board include a female cable connector with 25 pins. This is located on the left short edge. On the right edge is an eight screw connection terminal strip. Each of these screw connections is individually numbered. The board also has five stab-on connectors, which are located on the top board edge. These are labeled +12, COM, -12, +24, and 0.
The F31X118CCAACG1 has four LED (light emitting diode) indicators. Three of these are clustered together while one is placed off on its own. The board has a single jumper switch, a single transistor, and a rectifier.
Other components on the surface of the F31X118CCAACG1 board include ceramic capacitors and Sprague 30D capacitors. The board had diodes. It has metal film resistors of varying resistance. The board also has eleven integrated circuits, including one mounted in a heat sink to allow for the dissipation of heat.
More information to help with the F31X118CCAACG1 may be found through GE publications like data sheets, manuals, and user guides that reference this board number. These publications will help guide installation and maintenance procedures, and should also provide safety guidelines. Technical support for this board and for this board series was originally provided by General Electric.
