About the F31X133PRUABG1
F31X133PRUABG1--Process Interface Card
The F31X133PRUABG1 is a circuit board fabricated by the General Electric company as part of their general purpose drives. This includes their DC-300 and their AC-300 drives. The F31X133PRUABG1 is part of the 531x series of boards and is one of several Process Interface Cards available within this series. Not all PCBs are compatible with all drives; please check your manual for compatibility.
The F31X133PRUABG1 is a square shaped board with mounting holes drilled in each corner. The board has several lines of metal film resistors located across the surface of the board. It has seven potentiometers and one switch component. The switch has seven individual toggles on its top surface that can be individually set into position.
The F31X133PRUABG1 communicates with off-board components and other boards through its 26-pin vertical pin cable connector and its 19-pin vertical pin cable connector, its single vertical pin header connector, and through connections to its three-position terminal strip. All of these components are located on the same side of the board.
Other components located on the F31X133PRUABG1 include thirteen jumper switches, ten integrated circuits, diodes, and capacitors made from several materials. More information on how this board operates and the function of each of its components can be found through the board’s data sheet.
If information is needed regarding installation or maintenance of this equipment, please refer to series user guides or drive manuals published by General Electric, which should have this information in detail. Please follow all suggested safety and handling procedures.
