F31X139APMALG2

About the F31X139APMALG2

The F31X139APMALG2 is a GE printed circuit board used as a Circuit Micro Application Control Board.  This is used within the DC-300 drive and other similar general purpose drive systems manufactured and released by GE.  The F31X139APMALG2 is part of the 531x series of boards and has an alternate board number of 531X139APMAXG2. Your system’s user guide or manual will help establish compatibility with this series of boards.

The F31X139APMALG2 has multiple board locations marked that are not actually populated by components; this is because different versions of the board are sometimes populated by a different number and types of components.  The F31X139APMALG2 is marked with codes like FR01/0, 94V-0, 005/0, and 02/02.

The F31X139APMALG2 has two terminal strips with openings that face each other.  Each of these terminal strips has six screw connections. The board has five relays and about twenty jumper switches.  The board has over thirty resistor network arrays and four potentiometers. It also has metal film resistors, diodes, and capacitors made from polyester vinyl and ceramic material.

The  F31X139APMALG2 has four vertical pin header connectors and two vertical pin cable connectors.  Headers range from two pins up to twenty-four. The board has thirty-five integrated circuits. Most ICs are marked on their top surface with their manufacturer and their part number.  For more information on these parts, please consult individual data sheets. For more information on the board, including handling and safety guidelines and installation instructions, please refer to publications from the manufacturer like series manuals or user guides.