About the F31X187VCTABG1
The F31X187VCTABG1 is a board component manufactured by General Electric for their general purpose drives like the DC-300. These are industrial drive systems that are powerful and flexible designed for various industrial applications. Please review your system’s manufacturer’s user guide to determine if it is compatible with the 531x series of boards. Our team will be happy to help you with this, too.
The F31X187VCTABG1 functions as a Volt Current Transducer. The board is a small rectangular board with several factory-made drill holes to allow for mounting options. It also has a rectangular cutout near the top edge and a slot cut toward the center of the board. The board is marked with the codes FR00/0 and VA-4.
The F31X187VCTABG1 is populated by four switch components. Each of these has four toggles on their top surface. On one side, the switches back up to 9-position terminal strip. On the other, two of the components back up to two resistor network arrays. The board has two additional 3-position terminal strips; these are located opposite each other in the upper corners of the board.
The F31X187VCTABG1 has six potentiometers, two voltage regulators, and multiple resistors. The center of the board is taken up by a transformer with eight surface wires (four red, four white) connecting it to the board surface. The board also has twenty-two jumper switches, capacitors, diodes, and integrated circuits. More information about board components and the function of the board may be found through publications from the manufacturer, like user guides, data sheets, and manuals. Please follow all installation procedures and safety recommendations as states in these publications.
