About the F31X191RTBAG3
The F31X191RTBAG3 is a PCB component made by GE for use within the company’s general purpose drive system. This includes the DC-300 drive. These drive systems are typically used in industrial settings. These flexible, powerful drives may be used in a variety of ways. The board is part of the 531x series. Please check your manual or user guide for compatibility issues.
The F31X191RTBAG3 is a long and narrow board with only a few components that tend to be in a regular sequence. The board is drilled in each corner for mounting. It is marked with its alternate board number (531X191RTBALG3) and codes 002/02 and 006/03. Reference designators are used to mark components.
The F31X191RTBAG3 has a 51 position terminal strip placed parallel to one board edge. Each position of this component is labeled and numbered. The board has seven MOVs (metal oxide varistors,) as well as seven resistors and seven diodes. It also has seven jumper switches. Each of these components corresponds to a relay. Each of the seven relays is placed in a parallel line down the center of the board. They are connected to the board using metal clasps. Inputs on the terminal strip also correspond to each of these relays. For more information on the operation of the board, or for information on installation or handling, please refer to publications from General Electric like manuals, data sheets, or user guides that reference this part number. Please follow all safety precautions as recommended by the original manufacturer.
