F31X300CCHALG2

About the F31X300CCHALG2

The F31X300CCHALG2 is a board component designed to fit into the DC-300 and other general purpose drives manufactured by GE.  

The F31X300CCHALG2 functions as a Control Board.  The board is alternately marked with the number 531X300CCHALG2.  The codes 002/02, 006/03, and CCI-3-0 9944 also appear on the board surface.  

The F31X300CCHALG2 has multiple connectors on its surface.  This includes two vertical header connectors(a 9-pin connector and a 24-pin connector,) and six male vertical pin cable connectors.   The board also has a single line of pin socket connectors located along the right edge. Another line of these pin socket connectors is located near the center of the board. Each pin is individually labeled.  

The F31X300CCHALG2 is populated with eight standoff connectors.  These are designed to support and separate optional auxiliary boards from the motherboard. These optional boards communicate with the motherboard through cable connectors made to vertical pin connectors.  The board has six of these male vertical pin cable connectors located around the board, as well as two vertical pin headers.  

The F31X300CCHALG2 has a single push-button switch.  The board has eleven transistors. It has twenty-five resistor network arrays and twenty-eight jumpers switches.  There are six red LED indicators located in a single straight line. These are marked with the numbers 32, 16, 8, 4, 2, and 1.    The board also has eight potentiometers, inductors, and surface wiring. There are over thirty integrated circuits. The board uses diodes, metal film resistors, and capacitors made of ceramic material, polyester vinyl material, and of electrolytic material.