F31X306LCCABG1

Product Description

The F31X306LCCABG1 is a circuit board component manufactured by GE as part of various general purpose drive systems, including the DC-300 drive. These drives, which are typically used for industrial applications, are flexible and powerful systems that can be configured for multiple uses. This board is part of the 531x series and has a secondary board number of 531X306LCCADM1.   Refer to your user guide/manual to establish compatibility with this board series.

The F31X306LCCABG1 is a Communication Card.  It is a rectangular shaped PCB with multiple drill holes every corner except the upper right, which has a single drill hole.  It is marked with codes 002/03 and 006/04. The edges are lettered and numbered for simple alignment. The board includes connectors like two male vertical pin connectors, a narrow female vertical connector, and a narrow cable connector that is located on the bottom edge of the board.   There is also a small three-position terminal strip located in the bottom right corner of the card.

The F31X306LCCABG1 has eight jumper switches.  There are fifteen resistor network arrays located across the board surface.  Two transistors are placed on the surface.

The F31X306LCCABG1 uses resistors composed of metal film.  The board has ceramic capacitors as well as electrolytic capacitors.  Integrated circuits (over 25,) include CMOS SRAM, field programmable gate arrays, NAND gates, and analog Bus Drivers.

The most notable component on the F31X306LCCABG1 is a sixteen-position alphanumeric display.  This component is placed parallel to the short edges of the board on the left side. More information on this board may be found using manuals, data sheets, or user guides published by GE.