F31X309SPCAGG1

About the F31X309SPCAGG1

The F31X309SPCAGG1 is a PCB manufactured by GE as a component for the DC-300 drive system, and can also fit into other general purpose GE drive systems.  GE general purpose drives are typically used in industrial applications. The F31X309SPCAGG1 is part of the 531x board series. Please refer to your system’s user guide or manual to establish compatibility with this series of board.

The F31X309SPCAGG1 functions as a Signal Process board.  It is marked 006/04. It is also marked with an alternate board number 531x309SPCAHG1. Each corner has a factory-drilled hole.

The F31X309SPCAGG1 has a terminal strip with fourteen screw positions.  This component is on the left edge of the board. It has two male vertical pin cable connectors and multiple pin socket connectors placed at different places on the board.  The board also has ten jumper switches.

The F31X309SPCAGG1 is populated by twenty-one resistor network arrays.  It has six potentiometers. The potentiometers are placed side-by-side along the bottom edge of the board.  These are labeled 2RESP, 2SCALE, 2ZERO, 1RESP, 1SCALE, and 1ZERO. The board has one switch component located in the upper left corner.  This component has seven toggles on its top surface.

The F31X309SPCAGG1 has metal film capacitors, diodes, capacitors of several materials, and integrated circuits.  ICs include oscillating chips, high-performance analog line drivers, high-performance analog buffers, and high-performance analog operational amplifiers.  More information can be found using manuals, data sheets and user guides that reference this board number. These publications should provide such information as installation procedures and handling/safety guidelines.