About the IS200EDSLH1A
The IS200EDSLH1A model is an Exciter Regulator Dual Selector (EDSL) produced for the EX2100e series by General Electric. This model will be used in shunt contactor or transfer control modules as part of a 120 A or 35 A regulator system. This model has a part-specific manual but cannot be found available online. This board was designed to function as a circuit board and can be used in dual or simplex control systems. If you must replace or repair the EDSL model please ensure that it has been de-energized prior to removing the model from its location.
This model was specifically designed with advanced technology in mind. The IS200EDSLH1A model can be used in a dial redundant brushless regulator that is more cost-effective. When being used in the EX2100e system there is a PSS (power system stabilizer) software that allows the generator to transmit and produce more power in a more stable manner, to do this the PSS will reduce frequencies for rotor oscillations.
Typically the IS200EDSLH1A model will operate on a scale of eighteen to thirty-two volts of direct current. There are several other boards that will be used with the EDSL model when mounted in the Shunt Contactor Module such as the transfer relay, DC output contactor, and the shunt. When being operated in the Shunt Contactor module it will operate as a 35 A regulator system.
If you have any questions regarding pricing for this model please contact our sales team by phone at (919) 372-8413 or by email at sales@axcontrol.com Monday through Friday 8 a.m. to 5 p.m.
