About the IS200RCSAG1ABB
This IS200RCSAG1ABB RC snubber assembly was manufactured by the industrial giant retailer General Electric, more specifically by their GE Industrial Systems shell manufacturer that handles the creation of all EX2100 Excitation Control System Series products. This particular PCB or printed circuit board is a modified version of the original IS200RCSAG1 parent board; featuring three significant product revisions rated at A, B and B grades respectively. The IS200RCSAG1ABB PCB is better-definable as its manual-specified functional description as a RC Snubber Board, which happens to align exactly with the RCSA functional product acronym.
Hardware Tips and Specifications
Before attempting to interpret or identify the various hardware components available affixed to the base board of this IS200RCSAG1ABB RC Snubber Board, it is important first to understand the full range of this board's intended functionalities and applications. The primary purpose of this IS200RCSAG1ABB board's creation was to provide snubber circuits for 1800 or 1000 Innovation Series nonregenerative sources' SCR or diode-type modules. An additional application of this RCSA-abbreviated board can be identified in its noise isolation for applicable gate drive circuits.
After a description of this Innovation Series Board's functionality, some of its hardware components should be well-contextualized. A primarily-highlightable hardware component employed by the IS200RCSAG1ABB RC Snubber Assembly is its two sets of SCR and diode connections, which are included in this board's assembly with the purpose of physical difference consideration between physical viable 1800 and 1000 frame units within the Innovation Series. As mentioned above, this IS200RCSAG1ABB RCSA board makes use of a series of snubber circuits; two identical circuits per board. One of these snubber circuits corresponds with this board's SCR connection, while the other corresponds to the previously-described diode connection. Each snubber circuit features different pulse width, frequency, and peak voltage values, depending on the circuit's status as measuring resistance of capacitance. It is important to note that this RCSA snubber assembly does not make use of any manually-moveable jumpers or customizable hardware components, although four factory-drilled holes are included in its assembly for installation purposes. Before making a purchase decision for this IS200RCSAG1ABB PCB, it is important to recognize its status as a PCB modified from the original IS200RCSAG1 product through its inclusion of three significant product revisions. All of the product-centric information included on this page is primarily based on the original IS200RCSAG1 product, which is detailed in relevant instructional manual materials.
