Frequently Asked Questions about DS200ADMAH1A
What is a DS200ADMAH1A board?
The DS200ADMAH1A is an Analog to Digital Printed Circuit Board that is installed in a DS200DSPC Digital Signal Processor as an option board and enables it to receive and transmit digital input signals for the LS2100 control system.
What is the purpose of the numerous analog inputs provided to the DS200ADMAH1A?
With the number of analog inputs, each has different functions, four of which are scaled to drive a 500 picofarad load to ±10 V with 12-bit resolution and 2K ohm.
The DS200ADMAH1A board has a number of discrete digital I/O inputs, what is the purpose of the digital input signals that are received by the ADMA?
The digital input signals that are received by the DS200ADMAH1A board are registered and interfaced to the attached DSPC's board DSP through the EPLD when this function has taken place it allows for application-specific adaption of the interface.
How many connectors are on the ADMA board?
There are three connectors, a XA_, XB_, and a TBPL connector. The XA_ connector is a 60-pin high-density connector, the XB_ connector is a 40-pin high-density connector, and the TBPL connector is a 60-pin high-density cable ribbon cable header.
What information do I need when reordering the ADMA board through AX Control?
When reordering the DS200ADMAH1A board through AX Control it is best if pictures of the board have been taken. The model number will also need to be provided, the model number can be found on the edge of the board.