About the IS200FHVBG1A
High Voltage Gate Interface Board IS200FHVBG1A is part of the LS2100 Series produced by General Electric Industrial Systems. This model is used primarily for cell voltage monitoring and SCR gate interfaces. This IS200FHVBG1A High Voltage Gate Interface Board device's greater LS2100 Series has to be recognized as a legacy General Electric product series given its eventual near-complete manufacturing discontinuation as encouraged by GE.
Hardware Tips and Specifications
There are current sensors within the board that can detect whether the silicon-controlled rectifiers (SCRs) are blocking or conducting voltages. If SCR blocking voltage is detected the cell status data will be sent to the FGPA board and the FGPA board will then turn on the red C STAT LED. When this board is being mounted it will almost always be mounted within the Source Bridge Cabinet. The IS200FHVBG1A model also has many different circuits embedded within the board. Within the Load Commutated Inverter, there must be one FHVB for every SCR. There are several potential hazards that can occur within the FHVB board, one of the potential hazards can be the FHVB experiencing overvoltage, if the model experiences overvoltage it can cause potential burns or shocks.
The IS200FHVBG1A model is no longer in production and is mostly obsolete at this time. It is vital to note that the IS200FHVBG1A board will be used to replace the DS200FGPAG1A model that is also in the LS2100 Series. For matters regarding pricing and availability please reach out to us by email or phone. This IS200FHVBG1A High Voltage Gate Interface Board product offering is actually not considered by and large to be the originally-developed product of its specific intended General Electric functional product role, as that would have to be rolled out as the IS200FHVBG1 parent High Voltage Gate Interface Board notably not taking advantage of this IS200FHVBG1A High Voltage Gate Interface Board device's sole A-rated functional product revision.