About the IC3600AAMA1B
The IC3600AAMA1B is a GE FANUC Analog Multiplexer card manufactured for the Mark I/Mark II systems. These systems were designed for service in temperatures as varied as minus to plus 50C, and provided fast response, with accurate performance with adaptability to diversified gas/steam turbine cycles and applications. Control parameters like startup, acceleration, speed, temperature, and load are all generated electrically, and computed and checked electrically.
The IC3600AAMA1B is factory drilled in two corners. The opposite edge of the board is numbered 2, 10, 20, 30, 40, and 50. These numbers correspond to a twenty-five pin system designed to connect the IC3600AAMA1B to another board. The IC3600AAMA1B is also marked with its identification number, the GE symbol, and “006/12.”
The IC3600AAMA1B has four trim potentiometers placed along one edge. Three jumper switches are placed between these four components. The board also has one rotary potentiometer. The board has one circuit. This is placed near the middle line of the board.
The IC3600AAMA1B has four transistors. It is built with several diodes, as well as several lines of both carbon composite and ceramic-covered metal film resistors. These components have been marked with proper codes for easy identification.
Our warehouse will package the IC3600AAMA1B in a static reducing sleeve before sending it to your facility. If original paperwork is still available, it is suggested technicians review manuals and datasheets for this part before installation begins. Only qualified personnel should maintain Mark I/II components. All technical support for the MKI and MKII was provided by GE.
