About the IC3600ADAA1A
The IC3600ADAA1A is a FANUC D/A Converter card for the Mark I/Mark II Speedtronic series from GE. These series can manage heavy duty GE turbines rated from 4000 hp for individual units to 400 Mw of combined cycles for larger systems. Mark I and Mark II systems can function in temperatures from -50 Celsius to +50 Celsius. The systems electrically check, indicate, and generate processes such as temperature, load, speed, and acceleration.
The IC3600ADAA1A has drilled holes in two of four corners. The board is marked on one edge with its unique card identification number. One long edge is numbered from two to fifty by tens (2/10/20/30/40/50.) These markings are made underneath a system of twenty-five right-angled pins.
The IC3600ADAA1A has three trim potentiometers located on one edge. As variable resistor components, trim potentiometers may be used as voltage dividers. The board also has two transistors, which are located side by side.
The IC3600ADAA1A is built with two lines of resistors. Each of these resistors is individually numbered. Most resistors on the board are four- and five- banded fixed carbon film resistors, but it is worth noting R26 is a carbon composite resistor. There are fifty-one resistors in all, including the potentiometers.
The board also has a single line of diodes. There are twenty diodes in all on the board; however, these components are numbered CR1 through CR10 and CR21 through CR30.
The IC3600ADAA1A will be protected by a static-reducing sleeve during shipping. All technical support for this product was provided by GE.
