About the IC3600AOAH1
The IC3600AOAH1 is a GE FANUC component for the Mark I and Mark II systems. These systems were released by GE for gas/steam turbine system management, and have been used worldwide for a variety of applications, including marine, utility, pipeline, process and combined cycles. They are used in ambient temperatures as varied as -50C to +50C. While not as complicated as later Speedtronic systems like the Mark IV, V, or VI, it is a testament to the longevity and reliability of the MKI and MKII that so many of these systems are still viable and running after decades of use.
The IC3600AOAH1 functions within the larger system as an Amplifier Card. The board carries the board id number and the code “KCC.” The back of the board is marked 68A944279G1.
The IC3600AOAH1 is drilled in two corners. The other edge of the board carries fifty-one individual metal pins. Underneath these, the board is numbered from one to fifty-one by fives. As a single component, the pins function as a backplane which connects the board into the larger Speedtronic system.
The IC3600AOAH1 is built with seven integrated circuits. It has ten trim potentiometers, twenty transistors of varying design, and seven TP test points. Capacitors on the board tend to be made either of ceramic material or of polyester vinyl. Resistors are usually carbon composite. Vertical mounting is used for many components.
A protective, static-reducing sleeve is used on parts leaving our warehouse. If OEM publications like manuals and datasheets have been retained, AX Control recommends reviewing these for instructions and safety data before installation of your part.
