About the IC3600AOAL1C
The IC3600AOAL1C is an Op Amp Card for the Mark I or the Mark II series. This is a GE FANUC component. The MKI and MKII series were both designed to give gas/steam turbines better performance. They were designed for accurate, fast performance with maximum starting and running reliability, with adaptability for gas turbine cycles and applications. Both systems are easily scalable and can be used to run systems from single turbine 4000 hp systems to power systems with combined cycles of 400 Mw.
The IC3600AOAL1C is marked with several codes. On the front side, it is marked with 006/02 and 002/02, plus the code 259A3589G1. The board number and the GE logo also appear on the board surface. The rear of the board is marked 003/04.
The IC3600AOAL1C is built with several through-hole ceramic capacitors. It also has two polyester vinyl capacitors rated at 200V. The board has several lines of carbon composite resistors of differing resistance.
The IC3600AOAL1C has seven trim potentiometers and nine integrated circuits. Circuits include amplifiers and two-input NAND gates. Trim potentiometers may be used for voltage division or to tune, calibrate or adjust circuits.
The IC3600AOAL1C is built with a line of right-angled pins on one edge that are designed to connect to wiring within the frame of the Speedtronic system. The wiring/pin combination allows the board to communicate with the rest of the system.
Our team will ship the IC3600AOAL1C in a protective static-reducing sleeve. Tech support for Speedtronic MarkI/MarkII products was provided by GE.
