About the IC3600EPSM1
The IC3600EPSM1 is a human-machine interface or HMI created for the Mark I and Mark II series manufactured by General Electric. A human-machine interface (HMI) is used to allow workers to interact with the entire set up and allows the workers to adjust and control things as needed. The IC3600EPSM1 connects into the existing setup. The IC3600EPSM1 allows the worker to control the amps that go through the circuit boards using two black knobs. The upper knob is labeled “FUSE THREE (3) AMPS” and the lower knob is labeled “FUSE ONE (1) AMP”. The IC3600EPSM1 has two auxiliary ports above the knobs. One auxiliary port is red while the other auxiliary port is black. The IC3600EPSM1 has a large red light above the auxiliary ports. Above the light is a metal toggle switch labeled “ON” above the switch. The IC3600EPSM1 has eight thin metal fins along the side that are split into two groups of four to allow for proper air flow to cool the HMI down. In between the metal, fins are an assortment of wires that allow for the IC3600EPSM1 to be attached to the system. The IC3600EPSM1 can be secured by placing a few screws in the pre-drilled locations.
If you would like additional information or a price quote on the IC3600EPSM1 please call AX Control’s trusted staff.
**General Electric has provided the initial technical support. The staff at AX Control recommends referring to the original manufacturer's manual for safety procedures and instruction on how to install the part.
