About the IC3600EPZU1B
The IC3600EPZU1B is a GE FANUC Power Supply Board for the Mark I/Mark II series of gas/steam turbine management. These are Speedtronic systems. Designed to be adaptable and scalable, the Mark I and Mark II can manage heavy-duty turbines as small as a single 4000 HP unit to a power station rated for 400 Mw combined cycles. These systems have been used worldwide in temperatures from -50C to +50C in to run pipeline pumping stations, marine drives, and industrial generator drives, to name just a few applications.
The IC3600EPZU1B has several markings, including the board identification, the GE “USA” logo, the codes 002/01 and 006/01 and the mark EPZU. One board edge is numbered.
The IC3600EPZU1B has four diodes, two wire-wound resistors, and one fuse. The resistors are marked 1K 5% 10W 2147901 and 10K 5% 10W 214902. Capacitors on this board are made of polyester vinyl (two, marked 2Q78 10μF +/- 10%,) and aluminum electrolytic material (nine, marked 105C + 9807H 30D + TE 1307 50μF 50 VDC. The final component connected to the board is marked MOV1, and is a metal oxide varistor. The resistance of a MOV is very high, but when it exceeds a threshold voltage, the resistance drops and reaches zero. This component is primarily used as a line voltage surge suppressor.
The IC3600EPZU1B is built with a line of twenty-five metal pins on one edge, which connect into the main frame’s wiring and allows the Speedtronic system and the board to communicate with each other.
Parts ship from our warehouse in protective, static reducing sleeves. AX Control recommends a review of any OEM publications (manuals/datasheets, etc) that may include safety data or installation guidelines before unboxing your new part.
